Introducing New H2 Sensors from LNI for GC Oven

The Hydrogen sensors are security systems that allow the use of hydrogen on the GC in safety.

The sensors can be connected directly to the Hydrogen generators, to a SCADA system via RS485, or it can work independently using their special module.

They continuously check the presence of Hydrogen in the atmosphere (OPT.H2.SENS.1) or in the GC’s oven (OPT.H2.SENS.2). These sensors are engineered to automatically stop the flow of H2 production from the generator when the presence of Hydrogen exceeds the alarm threshold.

LNI H2 Sensor
Request Info/Quote

Why LNI’s H2 sensors for GC oven?

  • The best hydrogen sensors in the market according to many lab managers that have experienced various models.
  • Years of experience in the development of the most precise sensors.
  • Flexibility and ease of use.

H2 Sensor Kit-030-040

H2 Sensor Kit for GC Oven

This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the GC’s oven and blocks the Hydrogen generation if it detects an amount greater than the safety threshold.

The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.070 and, if the value exceeds the threshold alarm, the Controller deactivates the solenoid valve in the 6940.00.056 block. The alarm can be signaled to a PC and to a remote device.

Sensor 6940.00.070 is engineered to work in standalone mode connected by RS-485 network to a Hydrogen Generator. The sensor can be connected directly with the LNI Hydrogen Generators. When the hydrogen concentration detected exceeds a threshold of safety, the Hydrogen Generator automatically stops the production and audible and visual alarms will be reported.

Request Info/Quote