7010C Triple Quadrupole GC/MS

  1. Home
  2. 7010C Triple Quadrupole GC/MS

7010C Triple Quadrupole GC/MS

The new Agilent 7010C triple quadrupole GC/MS is the most sensitive instrument of the Agilent GC/TQ portfolio. For applications that demand the most sensitivity, like the analysis of dioxins and furans, the 7010C GC/TQ equipped with the high-efficiency ion source (HES) is the best fit with low limits of detection down to the attogram level.

New advanced GC/TQ intelligence includes SWARM autotune that finishes twice as fast as previous generations, new data acquisition modes like triggered MRM (tMRM), simultaneous dynamic MRM and scan (dMRM/scan), and diagnostic tools that minimize instrument downtime. Method development and method migration from the Agilent 5975 or 5977 GC/MSD is fully automated and easy to perform with the MassHunter Optimizer for GC Triple Quad.

7010C Triple Quadrupole GC/MS
Request Info/Quote

Increase Lab Productivity with Intelligent GC/MS—The Agilent 7000 Series GC/TQ Systems

7010C Triple Quadrupole GC/MS

  • The high-efficiency ion source (HES) delivers confident ultratrace-level analysis even in complex matrices, and the Agilent JetClean self-cleaning ion source reduces or even eliminates the need for manual source cleaning
  • The Agilent Reference Compound Introduction Valve enables easy analysis of environmental dioxins, while meeting the requirements and strict method detection limits of the EPA-approved alternative testing procedure
  • Data acquisition modes like data-dependent tMRM and simultaneous dMRM and scan mode enable targeted screening with confident quantitation of hundreds of analytes in a single run
  • Twice as fast SWARM autotune with incorporated diagnostic features pairs with the built-in intelligence of the 8890 and Intuvo GCs for improved system diagnostics and simplified access to powerful operations through an integrated touch screen and browser interface
  • A heated gold quadrupole, triple-axis HED-EM detector, and fast venting enhance the performance of the mass spectrometer by reducing neutral noise and instrument cool-down time
  • Agilent MassHunter software delivers complete control from tune to data analysis and report generation, streamlining your workflow
  • MassHunter Optimizer software easily transfers GC/MSD methods to GC/TQ and uses retention time locking software to reproducibly transfer methods between GC systems
  • Built-in technical controls combined with procedural controls ensure the security of your data, control access, and facilitate compliance as defined by US FDA 21 CFR Part 11, EU Annex 11, and similar national electronic record regulations
  • The Agilent Pesticides and Environmental Pollutants 4.0 Database contains over 1,100 compounds with multiple transitions per compound and over 7,500 matrix-optimized MRM transitions, helping you build acquisition methods that reduce matrix interferences
  • To enable a better-informed, sustainable choice, Agilent has partnered with My Green Lab to have the 7010C GC/TQ independently audited for their Accountability, Consistency, and Transparency (ACT) label

Request Info/Quote

Browse by